0 0

Modular inside polygonal filler post 4.66 x 125 cm

The modular inside polygonal filler post is a formwork panel from the Modular/GE universal formwork range from PASCHAL.

Together with the outside polygonal filler post 9.02 x 125 cm, the inside polygonal filler post forms the polygonal fillers with a formwork height of 1.25 m. The inside polygonal filler post is made of a high-strength flat steel frame with a steel facing. The pre-curved side part facilitate polygonal placement of the panels.

  • Long-lasting steel facing
  • "Round" formwork with standard panels
  • Simple and rapid connection
  • More cost-effective material compared to circular formwork
  • All radii can be shuttered
  • Full compatibility with all modular/GE universal formwork parts
  • Diverse application options

Information on use

Modular panels can be used together with the inside polygonal filler post for shuttering "round" walls and wall sections. The use of the polygonal filler on the inside and outside creates a polygon which looks circular in shape. For this, an inside polygonal filler post is installed between two modular panels. The repeated use between panels creates a polygonal curvature.

The inside polygonal filler post measures 4.66 cm in width and is slightly narrower on the outside than on the inside.

Clamping with polygonal filler posts

The tie rod is placed in the polygonal filler post, i.e., between the modular panels. The tie rod hole in the polygonal filler is located level with the tie rod flanging of the corresponding modular panels.
A wing nut is to be positioned on the inside of the polygonal filler post and a plate with ball-and-socket joint on the outside of the polygonal filler post. This must be installed horizontally so that it lies fully on the frame of the modular panels.
A spacer strap must not be used as the top most tie point. As such, the tie rod must be positioned above the panel frame of the modular panels and a tie rod guide must be used.  On the side the polygonal filler is connected to the modular panel with keybolts.

Due to the low working width of the inside polygonal filler post, the bolts are not arranged opposite each other but offset in height.


Please refer to the technical information for further system benefits and dimensions.

Dimensions: 4,66 x 125 cm
Weight: 5,8 kg
No review available for this item.