0 0

LOGO.3 inside corner post 25 x 25 x 340 cm

The PASCHAL LOGO.3 inside corner post 25 x 25 x 340 cm is an inside corner panel of the LOGO.3 formwork.

Measuring 25 x 25 x 340 cm, together with the LOGO.3 dismantling inside corner post, it constitutes the inside corner panels for a formwork height of 3.40 m. In addition to the extremely strong, profiled flat steel frame, the panel comprises two birch plywood sheets.

  • Made of profiled, very strong flat steel
  • 15 mm Finnish birch plywood, 11 ply
  • Fresh concrete pressure absorption of 70 kN/m² compliant with DIN 18218
  • The number of tie points is reduced to a minimum
  • Fully compatible with all other LOGO filler panels and plastic filler pieces
  • Forming of any wall thickness thanks to plastic filler pieces
  • Safe and rapid connection with the wedge clamp
  • LOGO.3 is also available in your corporate colours
  • Transponders for clear identification

Application information

Using the LOGO panels, the PASCHAL LOGO.3 inside corner post 25 x 25 x 340 cm facilitates the forming of right-angled corners. It can be connected to LOGO panels with a wedge clamp. If a plastic filler piece is positioned next to the inside corner post, locking screws or multi clamps are to be used.

Special features of the 340 cm-high panel

The 340 cm-high LOGO panel has holes for ties at the same height as the 270 cm LOGO panel. The 270 cm-high panel can therefore be located opposite the 340 cm-high panel and braced using tie rods. This formwork that is higher on one side can then be used as slab edge formwork. This option is used particularly often for lift cores. Outer formwork of 270 cm, inner core formwork of 340 cm, this then remains in the lift core as slab edge formwork up until the slab formwork is concreted.

Two tie points are sufficient for the panel height for concreting heights up to 340 cm. If the 340 cm-high LOGO panel is extended in height, the number of tie points is increased to just three for the panel height.

LOGO inside corner post impresses in terms of quality and handling

When dismantling the inside corner post is subjected to extreme mechanical stress. To protect the plywood from these loads and ensure a long service life, a metal protective edge is located at the front of the inside corner post. Thanks to the integrated attachment point for the crane lifting gear, the inside corner post can also be easily moved by crane.

LOGO.3 satisfies customer requirements

To increase your recognition value, the PASCHAL LOGO.3 formwork can be produced in your corporate colours on request. In addition, thanks to the PASCHAL ident technology, our transponders uniquely identify each LOGO.3 panel.


Please refer to the technical information for further system benefits.

Leg length: 25 cm
Dimensions: 25 x 25 x 340 cm
Weight: 78,0 kg
No review available for this item.